Enamel 11oz - silver rim/black

BLACK ENAMEL CUP WITH STAINLESS RIM

Enamel cup with safe stainless rim (SPCC 304)
Coating ORCA ( the adhesion of the coating to colored enamel cup is worse than to white enamel at the current stage of development )
White ink / OKI must be used for this dark shade

DIMENSIONS - WEIGHT

Diameter rim 87mm / Cup diameter 79mm / height 81mm
Volume 11 oz  330ml / weight app 150g
Max. size of printed image app. 55 x 200mm

PACKAGING

Cups are sold individually
Case contains 48 cups / each at individual white box / weight app. 10 kg
( You can use also gift box STD, color one or box with window )

PRINT - TEMPERATURES - TIMES

CLASSICAL MUG PRESS - SUBLIMATION
Use special heater BJ900 - ENAMEL MUG 11oz to Mug Press BJ900
Use standard size of the heater to BJ880/890, print 2 cups against each other at Mug Press
Basic - Working Temperature: 140-160C ( 250-320 ) / 100 sec

CLASSICAL MUG PRESS - OKI
Use special heater BJ900 - ENAMEL MUG 10oz to Mug Press BJ900
Use standard size of the heater to BJ880/890, print 2 cups against each other at Mug Press
Basic - Working Temperature: 120-140C ( 250-280F ) / 100 sec
The transfer of the image is the same as for a normal sublimation Mug, but after transfer, immerse the Mug up in water and remove the paper untill it is fully soft. Wipe off any foil residue from the Mug with isoporpyl. It is recommended to fix the print in oven or 3D at 200C / 10 min after removing the sublimation paper

Note : Do not use too high pressure in the Mug press - enamel mugs can bend slightly, which can peel off hard enamel

3D OVEN / ST3042
Use silicone wrap :  Silicone Wrap - 11/12oz Enamel Mug
or use heat shrink foil VASE
Switch on both bottom and top heating, 185 C / 8 min
! The setting of each individual Press may vary slightly !