Whiskey glass

WHISKEY GLASS

Elegant transparent glass with a thick bottom
Coating ORCA

DIMENSIONS - WEIGHT

Diameter 78 / height 94mm 
Volume 10oz   300ml / weight app 270g
Glass wall thickness 2mm, glass bottom 12mm
Max. height of printed image app 70mm

PACKAGING

Glasses are sold individually - we recommend ordering in 6 pieces see picture
Case contains 36 Glases / 6pcs per carton / weight app. 11 kg
Packaging for one Glass (sold separately): Gift Box Mug STD

PRINT - TEMPERATURES - TIME

GENERAL FOR GLASS - prepare a richer / contrasting image so that the max of ink is transferred to the coating and the image is clearly visible on the glass
GENERALLY FOR TRANSPARENT GLASS - we recommend ONLY one-sided printing, as the mug will shine through, double-sided printing visually overlaps 

CLASSICAL MUG PRESS BJ900
This glass has a high risk of breaking in a classic Mug press, please use a 3D Press!

Use heater : Heater BJ890 / 900 – STD Mug size 11oz
1st temperature          140°C
2nd temperature         170°C
Time :                        50 sec (countdown after reaching the 2nd temperature) 
Note:
A cold glass cannot be placed in a hot press, as there is a risk of the thin glass breaking!
Proceed as follows: Close the glass into the press when it is off = cold, set low pressure, turn on the press, set the temperature and time and heat the glass simultaneously with the press up to 140C, after the beep, start the print as usual

3D OVEN 
Use :    Shrink foil THERMOS  (Silicon Wrap - Mug11oz / 300ml)  
ST3042 : Turn on the bottom and top heating 195°C / 12 min  
PD2800 :