Mug press BJ900  ( 6-10 in ONE )  

 

 


BJ900
is full wrap around press with new mechanical design.

Mug press is supplied
with 6 heaters  (in price), heat pad for standard and narow Mugs is inserted inside metal sleeve for very easy and fast exchange, conical heaters for latte Mugs are changed including holder fixed with 4 screws ... power cable on all heaters are terminated with
4-pin (male) connectors.

New heaters are designed step by step as new sublimation products are  introduced. There are 3 new optional heaters you can order via e-shop.

Digital electronic unit controls time (range 0 - 999 sec) and temperature, (range 90 - 220 C), initial setting is done very simply by the help of three buttons on membrane keyboard.

STANDARD HEATERS -  ACCESSORY

1
Standard heater for majority of mug sizes  (diameter 80-87mm) :
STANDARD Mugs 11oz (white, coloredrim and  handle, combo, inner colored, color changing Mugs, theme mugs, LUX mugs, Fluorescent mugs, Metallic mugs, Polymer mugs etc .. )
BIG Mugs15oz ( white, combo, colored rim and handle,  inner colored mugs )


2 9oz heat pad (diameter 70-75mm) :
Espresso / Mug Narrow / Sport-Can-Straw Thermos
3 Conical Latte std heater for latte Mugs :
Latte 12oz
4 Conical Latte big heater for big latte Mugs :
Latte big 17oz 
5 Heating pad mini 2,5 oz
Picollo, Ristretto Mug
6 Conical heat pad shot glass 1,5 oz
Shot Glass

OPTIONAL HEATERS

7 Heater Thermos with wider heat pad :
Glass Stein Matte, Mug Stein narrow, Can thermos 500ml, Thermos silver / white 750ml,  Bowling thermos silver / white 750ml, Thermos sport 750ml
8 Heater Mug Stein Wide 0,5L for bigger diameters :
Mug Stein wide  0,5L, Mug Jumbo
9 Heater Enamel Cup 12oz specific shape of heater for enamle cups :
Enamel cup 330ml with silver / black / blue rim, Mug imitating enamel cup ...
10 Heater Enamel Cup 18oz specific shape of heater for enamle cups :
Enamel cup 460ml with silver / black rim  

 

        E-shop
        
   
   
 

Mitsubishi Electric technology for life - Mitsubishi Electric technology for life - Mitsubishi Electric technology for life - Mitsubishi Electric technology for life - Mitsubishi Electric technology for life
 
                                
                                Specific features

Procedure


























 

Mugs printing procedure
( standard Mug Press )


1  Print a mirror image ( for example on Ricoh , Epson printer ) - pls note, you need to use only special sublimation ink !

2  Fix the image on a Mug with 2 small pieces of adhesive heat resistant fixing tape

If temperature / time is set on Mug press
 ( see next chapter )  
 
.. switch ON the Mug Press and wait until press is heated to BASIC TEMPERATURE
( Mug press indicates readiness with an occasional beep )

3  Put Mug incl. image from side into open Mug press, close lever and press button with icon "square" on membrane keyboard.
If you put cold mug into heat pad, temperature goes down as cold Mug is cooling heater, but after short time temperature gradually
climb up to WORKING TEMPERATURE when the press automatically switches to time countdown.

Display is showing remaining time and finally Mug Press issues audio signal - finish sublimation cycle by pressing " square" button, open the lever and remove Mug from Mug Press ( switch off Mug Press )

4  Peel off the image gently with your fingernail from Mug and let Mug to cool


RECOMMENDED / TIPS :

* When you load Mug from the side into Mug Press, be carefull not to accidently bend corner of the image on heating pad.

* Since ear cup remains cold over the whole heating cycle at the Mug Press, you can remove the Mug from Mug Press immediately after the completion of the cycle and to check quality of imprinting - gently bend the corners of still fixed image and make sure that underneath of all corners is the same contrast and saturation of colors - if not ( owing to low pressure or ... ) - rotate with Mug about 180 degrees and put it in the press again and repeat the cycle


* If you are going to peel off  the image from Vow Mug (color change Mug) be very careful, because this coating is very soft at hot state and you can easily break through the top layer - there may remain permanently visible white scratches from your fingernail. Better remove the image after partial cooling cup.


 
          
Side View             
Side View  
                                                            

Electronic unit































 
Setting of basic / working temperature and time

The press purchased from us has correctly adjusted electronics unit, but if you need to change temperature / time
(another type of
ceramic / another kind of coating), please do the following :


BASIC TEMPERATURE SETTING
Press 1x button MODE (SET light is ON) =  default 90 C ( 140 set by us )
Using button "plus" and "minus" you can set basic temperature.  If you set 140 C / 250 F, Mug press is allways ready when you have more Mugs to print ( if the press is not in use, pls turn it off )

WORKING TEMPERATURE SETTING
Press 2x button MODE (SET + TEMP light ON) = 160 - 170C* / 320 F
Using button "plus" and "minus" set working temperature acc. to type of ceramics / coating.

TIME SETTING
Press 3x button MODE (SET + TIME light ON) = 40 (sec) *
Using button "plus" and "minus" set heating time ( Mug will be heated on 170C for 40 seconds ).
( Last set values are immediately memorized )

Press 4x button MODE - original status, display is showing current temperature of heater.

RECOMMENDED / TIPS :

* Lower basic temperature reduces the thermal shock which absorbs ceramics during insertion into a heated press. This is especially important for products made of glass (risk of breakage in case of uneven heating)

* It is recommended to tune step by step ideal working temperature to a particular type of Mug press and ceramics, which will be printed.  Individual Mug Presses ( similair in appearance ) may have different types of temperature sensors as well calibration -- the recommended values ( time / temperature ) given here are valid ONLY for MUg Press BJ880 / BJ900 and the ceramic we supply ( coating Orca ).
 
There is a simple rule to set correct working temperature - if you have low contrast colors on printed Mug, but contrast colors stood on sublimation paper - increase the temperature ( sublimation paper must visibly " washed-out " after printing cycle) 
Just on the contrary - if sublimation paper is sticking to surface of Mug, sublimation paper gets yellowish and black color is turning into brown, Mug is overheated - decrease temperature.

* If you print on a subject that doesnt have similair thermal inertia like ceramics - for example metal thermos or mug polymer,
temperature rises from basic to the working temperature very quickly - you have to prolong time to about 90 - 120sec
( please, see eshop, where is recommended time / temperature to each product )
 

Accessories
(heat pads)
 All heaters ( supplied with Mug Press )  
Optional
accesorries
( heat pads )           
 
New optional heaters 
                                                 

Heater Thermos with wider heat pad :
Glass Stein Matte, Mug Stein narrow, Can thermos 500ml, Thermos silver / white 750ml,  Bowling thermos silver / white 750ml, Thermos sport 750ml



Heater Mug Stein Wide 0,5L for bigger diameters :
Mug Stein wide  0,5L , Mug Jumbo

Heater Enamel Cup 12oz specific shape of heater for enamle cups :
Enamel cup 330ml with silver / black / blue rim, Mug imitaint enamel cup ... 
 


Heater Enamel Cup 18oz specific shape of heater for enamle cups :
Enamel cup 460ml with silver / black rim 




 

                                Technical specifications
 

Functions  digital adjustment of temperature and time, adjustable diameter and pressure
Operat. conditions temperature 5 do + 400 C
Power requirements 220V, 50Hz, 300W 
Dimensions (WxHxD) 340 x 350 x 280 mm 
Weight 10 kg ( incl. all heaters),  Mug press alone 5kg
Color white
Certification CE
    BJ900     319,6 EUR (Export price without VAT) Liberek spol. s r. o.

SPARE PARTS
SPARE HEATERS :
                     Heat pads are supplied with cable and " male " 4-pin connector
                                       
                   
        male / BJ880-890-900  
                
  Control box
  
   42 EUR  spare control box for Mug press BJ900 / 890 / 880
  Heat Pad BJ900
   standard size
   31,6 EUR  spare heat pad for Mugs standard size 11 / 15 oz
  Heater BJ900
   standard size
   40,8 EUR  spare heater ( heat pad including metal brackets ) for Mugs standard size 11 / 15 oz
  Heat Pad BJ900
   9 oz
   31,6 EUR  spare heat pad thicker rubber) for size 9 oz    Mug Espresso / Mug Narrow
  Heat Pad BJ900
   special size
   31,6 EUR  optional special heater for Beer Stein Rectangular handle / Beer Stein blue
  Heat Pad BJ900
   latte std size
   31,6 EUR   spare heat pad for Mug Latte std size  12oz
  Heat Pad BJ900
   big latte size
   31,6 EUR  spare heat pad for Mug Latte std size  17oz
  Heat Pad BJ900
   Mini Mug oz 2,5
   40 EUR  spare heat pad for mini mugs  Mug Picollo / Ristretto with saucer
  Heat Pad BJ900
   Shot Glass 1,5 oz
   40 EUR  spare heat pad for conical shot glass 1,5 oz